Cathode Lighting Systems FCLS-Slim Specifications

LCY-07084A-8 [Note7-4] Apply to terminal of R0∼R5,G0∼G5,B0∼B5,SPR,SPL,CK,LS and LBR. [Note7-5] Apply to terminal of CLS,SPS,MODE1,MODE2 and U/L.

LCY-07084A-9 7-3) Timing characteristics of input signals Timing diagrams of input signal are shown in Fig3-1, Fig3-2. Table7-3

LCY-07084A-10 ７-4） Electric power consumption Table7-4 Ta = ２５℃ Parameter symbol Voltage conditiion ＭＩＮ ＴＹＰ ＭＡＸ Unit Analog ISHA VSHA=+5.3

LCY-07084A-11 (8) Input signals, basic display color and gray scale of each color Table8-1 Colors & Data signal

LCY-07084A-12 (9) Optical characteristics Table9-1 Ta=25℃ Parameter Symbol Condition ＭＩＮ ＴＹＰ ＭＡＸ Unit Remarks Horizontal θ21, θ22 50 60 −

LCY-07084A-13 [Note 9-1] Viewing angle range is defined as follows. [Note 9-2] Contrast ratio is defined as follows:

LCY-07084A-14 [Note 9-4] Definition of panel surface brightness Measured on the center area of the panel at a viewing cone 1-degree by TOPCON lumi

LCY-07084A-15 (10) Mechanical characteristics 10-1) External appearance Do not exist extreme defects. (See Fig. 1) 10-2) Panel toughnes

LCY-07084A-16 12−3) Precautions in mounting ①Polarizer adhering to the surface of the LCD is made of a soft material and susceptible to flaw,

LCY-07084A-17 ③When metal part of the TFT-LCD module (shielding case) soiled, wipe it with soft dry cloth. For stubborn dirt, wipe the p

RECORDS OF REVISION ＭＯＤＥＬ Ｎｏ：ＬＱ０７０Ｙ５ＤＧ０６ ＳＰＥＣ Ｎｏ ：ＬＣＹ−０７０８４Ａ NO. PAGE SUMMARY NOTE 2008.1.16 - - 1st Issue

LCY-07084A-18 (13) Package form 13-1) Package form (Refer to Fig.4) 13-2) Carton keeping conditions ①The cartons can be piled up maximum 10 la

LCY-07084A-19 Table１4-1 Reliability test conditions Table 12 Temperature condition is based on operating temperature condition No. Test items Tes

LCY-07084A-20 Fig1.Outline dimensions

LAST−1 LAST １ ２ Thlpck Twlp Tsulpsp Tsusp Thsp Twsp Tcwh Tcwl Tcr Tcf Tsud Thd 1/fck 0.8VSHD 0.2VSHD 0.8VSHD 0.8VSHD (D1、

CLS SPS 1 2 7 8 9 486 487 488 ・・ (m,DH1) (m,DH2) (m,DH479) Horizontal invalid data period R0∼R5 G0∼G5 B0∼B5 CLS LP VCOM V0、V3、 V5、V7、 V9、V10 0.2VS

LCY-07084A-25 （Appendix） Adjusting method of optimum DC bias voltage of common electrode driving signal Photoelectric devices are very effective to o

LCY-07084A-1 TFT−LCD MODULE Ｌ Ｑ ０ ７ ０ Ｙ ５ Ｄ Ｇ ０ ６ DEVICE SPECIFICATIONS CONTENTS (1) Summary p3 (2) Features p3 (3) Structure an

LCY-07084A-2 NOTICE This publication is the proprietary of SHARP and is copyrighted, with all rights reserved. Under the copyright laws, no part of

LCY-07084A-3 (1) Summary This TFT-LCD module is a color active matrix LCD module incorporating amorphous silicon TFT. An outline of the modul

LCY-07084A-4 (5) I/O Terminal Name and Functions 5-1) TFT-LCD Panel Driving Part Table5-1 I/O terminal name and functions Pin No. Symbol

LCY-07084A-5 Pin No. Symbol i/o Description Remarks 51 VCOM ｉ Common electrode driving signal 52 VCOM ｉ Common electrode driving signal 53 C

LCY-07084A-6 5-2）Backlight fluorescent tube driving part Table5-4 Pin No. Symbol Description Remarks 1 A1 Input terminal (Anode 1) 2 A2

LCY-07084A-7 (7) Electrical Characteristics 7-1) TFT-LCD panel driving section Table7-1 Recommended operating conditions GND=0V , Ta=25℃ Par